Transparent film three-dimensional packaging machine emergency stop:
The transparent film three-dimensional packaging machine is equipped with an emergency stop button on the electrical panel and the tail of the machine, and the whole machine can not be started by pressing. The method of resetting is to rotate the button clockwise.
Fully automatic three-dimensional transparent film packaging machine structure principle and characteristics
Electrical safety device:
1. The conveying motor M2 is equipped with a thermal overload protection relay in the electrical box to protect the motor from damage.
2. The electrical box is equipped with a leakage circuit breaker to protect against short circuit and personal safety.
3. The five-way heating unit is equipped with limited current insurance to protect five solid state relays.
Adjustment of heat sealing temperature of transparent film three-dimensional packaging machine:
The heat sealing temperature of the transparent film three-dimensional packaging machine depends on the packaging speed, the material of the packaging film, and the thickness of the film. The required temperature can be easily set using the buttons on the temperature controller. When the green light is on, it indicates that it is warming up, the green light is off, and the red light is on, indicating that the temperature has reached the set value.
The temperature setting is recommended to start from a low temperature (such as setting 120 ° C), until the sealing is successful.
The above is the emergency shutdown operation of the transparent film three-dimensional packaging and the adjustment of the heat sealing temperature. I hope this article will let everyone know more about the operation mode of the transparent film three-dimensional packaging machine. If you don't know anything else about the product, or you don't know it, you can call us. We will provide you with a satisfactory solution.