All parts exposed to the air shall be made of austenitic stainless steel, and the surface treated with chemical plating or other treatments shall not rust or peel off.
This utility model adopts a semi enclosed visual window structure for safe operation, and the box loading working area is relatively isolated from the outside world. The surface of each part in the closed workshop is smooth, without dead corners, easy to observe, easy to clean, and easy to install.
The feeding rack before falling into the cardboard box should be easy to adjust and easy to pack. The adjustment of the feeding rack can adapt to changes in the specifications of the cardboard box. A release device is installed under the feeding rack to ensure that only one paper box is taken during each suction action. When used together, the box shape is quadrilateral. In addition, the vacuum can also be conveniently adjusted.
The material rack in the operating instructions should be easy to adjust and easy to place paper. The "falling" action should be correct, ensuring that only one piece of paper is carried during each "falling". The folding should be completed by mechanical folding, and there should be no damage during the folding process. When printing batch numbers on the box, it is necessary to ensure that the printing position is correct, the letters are adjusted quickly, and the batch number position error is<± 1.5mm; The position error of the batch number shall not exceed ± 1.5mm, and the batch number handwriting shall be clear and distinguishable, without overlapping or blurring.
It can have a centralized conversion processing mechanism suitable for single or multiple packaging forms according to process requirements, and can meet changes in packaging specifications after parts replacement and appropriate adjustments.
The foldable manual and the pusher for pushing (pushing) the packaging box into the formed paper box should have a buffering and overload resistant design, achieving soft pushing and not damaging the packaging and paper box during the pushing process. The folding of the two sides of the box should be a process of front and back folding and tongue insertion, with a smooth tongue trajectory. When inserting the tongue knife, it can fit the tongue without damaging it.
The speed of the box conveyor belt is uniform and stable, without any jamming phenomenon, ensuring that the feeding mechanism automatically enters and exits the box. During the packaging process, each shape is formed, and the interface between the insert, bottle pushing, sealing tongue and the conveyor belt should be balanced and able to pass smoothly.