The packaging process of the packaging machine can be divided into five steps: cutting, packaging, opening, filling, and closing.
1. Cutting: First, the cutting device cuts the material onto the conveyor belt, and the microcomputer will transmit the command to the origami machine and suction box device.
2. Lower box: The suction device takes out the paper boxes from the paper box library and places them on the box guide rail.
3. Opening the box: The guide rail clips fix the paper box, and the push plate pushes open the paper box. Two card plates that move with the paper box rise from both sides of the guide rail, clamping the sides of the paper box from the front and rear directions, causing the box to open at a right angle and move forward to the filling area.
4. Filling: The conveyor belt on the automatic box loading machine carries the material, and the push rod pushes the material into the empty box in the filling area.
5. Cover closing: After the push rod material is pushed into the box, the paper box will enter the cover closing station driven by the guide rail. Before closing the lid, the mechanism will first bend the tongue of the cardboard box, and the push plate will push the lid to bend, causing the tongue to insert into the box.